TL;DR: RK3588 Custom Edge Computing Board
New York, United States - September 12, 2026. The 239th WF-C3588-N6 shipment left Shenzhen for New York this week with 32,115 units aboard, after a full burn-in cycle and a destination-market document check.
AndroidSBC export compliance briefing covering the custom RK3588 motherboard line serving New York, United States. The line spans custom Android motherboards at the entry variant through core-board-plus-carrier work at the SOM end, all on the same Rockchip RK3588 silicon with 6 TOPS NPU, 8K H.265 decode and up to 32GB of LPDDR5. AndroidSBC ships the full range from the Wanlin Longgang plant, and New York buyers can mix custom variants inside a single framework agreement rather than opening a new supplier file for each product line.
About AndroidSBC and the Rockchip RK3588 Board Family
AndroidSBC is the export brand of Wanlin Manufacturing Group, a Shenzhen source-factory group that has spent more than a decade building custom OEM and ODM boards on Rockchip silicon. The line this release covers is the WF-C3588: nine custom motherboard variants built on the same Rockchip RK3588 octa-core 8nm platform with 6 TOPS NPU and 8K H.265 video, covering custom Android motherboards, custom industrial boards, core board and SOM carrier design, custom signage and video wall boards, custom kiosk and POS boards, custom robotics controllers, custom NVR boards, custom edge AI boards, and custom ARM PC and NAS boards. Wanlin's Longgang plant in Shenzhen builds the WF-C3588 for United States OEM, integrator and distributor programmes. For a New York buyer the practical value of the line is that one silicon and one supplier file cover nine custom categories.
WF-C3588-N6 Technical Specifications
| Parameter | AndroidSBC WF-C3588-N6 (Custom NVR and Security Surveillance Board) | Industry Average |
|---|---|---|
| Processor | Rockchip RK3588 octa-core 4x Cortex-A76 2.4GHz + 4x Cortex-A55 1.8GHz (8nm) + 6 TOPS NPU | Cortex-A55 NVR without NPU |
| Channel capacity | Up to 16 channels of analytics on the NPU with 8K decode headroom | 4 channels, cloud analytics |
| Video decode | 8K@60fps H.265 / VP9 / AV1 hardware decode, multi-stream | 4K ceiling, software decode |
| Storage | Dual SATA 3.0 arrays plus M.2 NVMe, eMMC 64GB to 128GB for OS | Single eMMC |
| Network | Dual Gigabit Ethernet for camera and client separation, optional PoE design | Single port |
| AI functions | Face recognition, LPR, behaviour analysis, perimeter detection on-device | Analytics subscription only |
| Access I/O | Multi-serial for turnstiles and readers, Wiegand, relay control per project | No access interfaces |
| Robustness | -40C to 85C option, fanless sealed chassis for gate cabinets | Consumer thermal profile |
| OS support | Linux Ubuntu, Debian, Yocto and Android, BSP ported per recorder | Vendor image only |
| Certification path | CE, FCC, UKCA, RoHS, EMC EN 55032/EN 55035 | No compliance file |
| Customization | Channel count, storage layout, I/O and firmware shaped per project | No engineering changes |
| Traceability | Per-unit barcode, burn-in record and per-lot Technical File | No lot documentation |
All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-C3588-N6 (Custom NVR and Security Surveillance Board) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For United States importers sourcing the WF-Series, the 16GB + 128GB (WF-C3588-N6-C) variant is the typical configuration for the custom NVR and surveillance programmes use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.
Challenges in Sourcing Custom NVR and Security Surveillance Board for United States Buyers
Buyers in New York who have sourced a custom nvr and security surveillance board for a few seasons tend to separate two questions: can the factory hold the price, and can it hold the allocation. The second one is harder. The Rockchip RK3588 is allocated at wafer level, and a 32,115-unit order placed against trader stock is the order most likely to slip a quarter without anyone warning the buyer. The second issue is firmware, not hardware. Vendors promise the full certified software stack and then ship a bare AOSP image, and the failure only surfaces at the warehouse when the unit is powered on against the customer's app.
The third exposure is paperwork. Factories that stamp marks without holding the underlying test reports leave the importer to produce a Technical File after the fact, which is exactly when the container is sitting in a bonded yard. AndroidSBC runs the custom board build, the certified image burn, the burn-in record and the certification file inside the Longgang plant, so the lot arrives complete rather than in pieces. The nine variants in the WF-C3588 cover smart NVRs, multi-camera recorders, face recognition terminals, access control, turnstile controllers, intercom stations, LPR cameras, perimeter systems, and behaviour analytics and each one carries three memory configurations, which keeps New York and United States buyers on standard custom SKUs for most requirements.
The United States paperwork question is settled before production. In the United States FCC Part 15 authorisation is required and an FCC ID applies to radio modules, while UL or ETL listing is usually demanded by the retail channel. The Longgang export desk prepares the destination-market file covering FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing administered by FCC / UL and releases it with the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), booking the lot into Port of Los Angeles on the Los Angeles to Yantian lane.
Competitive Comparison: WF-C3588-N6 vs Competing RK3588 Boards
The comparison set for the custom nvr and security surveillance board socket breaks three ways: catalogue boards with fixed I/O and no engineering support, re-badged imports with a sticker but no schematic, and source-factory custom boards that carry the BSP, the test bench and the certification desk in-house. The WF-C3588-N6 is in the last group, and the separation comes from Rockchip RK3588, from customization depth, and from the per-lot certified image burn.
- vs generic NVR chipsets: the WF-C3588-N6 carries the analytics on the 6 TOPS NPU, so the recorder does not ship a cloud subscription as a hidden dependency.
- vs PC-based recorders: a fanless board replaces a workstation-class recorder and survives gate cabinets and outdoor enclosures.
- vs camera-side AI splits: one board class covers the NVR, the face terminal and the turnstile, which simplifies spares and firmware across one estate.
- vs unbranded surveillance boards: the per-lot file and the burn-in record are what an installer needs when a perimeter line has to answer for uptime.
Global Custom NVR and Surveillance Board Market Trends
The Custom NVR and Surveillance Board market sets the pace for New York procurement this year, and it does not move on its own. The Edge AI hardware segment that MarketsandMarkets values at USD 26.9 billion in 2025, with a 32.7 percent CAGR reaching USD 108.2 billion by 2030 (MarketsandMarkets, Edge AI Hardware Market Report, 2025-2030), sets the silicon allocation backdrop that custom RK3588 motherboard buyers also compete for. Three patterns stand out in the WF-C3588 order book for United States:
- City surveillance NVR: a municipal programme records and analyses sixteen channels per node on a fanless board.
- Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-C3588-N6 board carries that headroom without a board change.
- License plate recognition gate: a parking operator pairs LPR on the NPU with relay control for the barrier.
What the Custom NVR and Surveillance Board data does not show is the operational cost of a supply break, which is why New York buyers increasingly weight supplier continuity above a marginal price difference.
Read together, the three patterns explain the move in New York from spot quotes to framework agreements released monthly, which is what a custom RK3588 motherboard programme needs to hold a twelve-month shipping window without a mid-year break.
Partner Success Story: Novara Interactive in New York, United States
Novara Interactive, an education display brand serving the United States market, deployed 6,900 custom WF-C3588-S3 interactive whiteboard boards for a district rollout. The rollout covered the city surveillance nvr, license plate recognition gate, and retail loss prevention workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.
- Deployed: 6,900 custom WF-C3588-S3 interactive whiteboard boards for a district rollout
- Region: New York, United States
- Models used: WF-C3588-N6 (lead SKU), plus eight sibling custom RK3588 board variants in the same platform family
- Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
- Logistics: FOB Shanghai Yangshan with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Los Angeles via the Los Angeles to Yantian lane
"EDLA certification and a classroom launcher were both factory deliverables. The touch panel routing was custom, the boot animation is ours, and eight hundred classrooms enrolled against the MDM in the first fortnight."
- Elise Tremblay, Head of Hardware
Field Report: a machine-tool retrofit at a manufacturing plant outside New York, where 32,115 units of the WF-C3588-N6 board were commissioned onto existing production lines
Reporter Pan Ze, on the ground in New York, United States. Commissioning engineers wired the WF-C3588-N6 boards into the existing fieldbus and ran a 96-hour production trial before sign-off. The boards held the cycle time on every line, and the plant's maintenance team kept two spares per line on the shelf rather than a full spare controller.
A carton-level audit matched 40 sampled serials against the burn-in database with no mismatch.
The inspection confirmed three things on the spot: the WF-C3588-N6 units hold the burn-in with a yield above 99.18 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing administered by FCC / UL, cleared for entry at Port of Los Angeles on the Los Angeles to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-variant custom RK3588 motherboard line with a per-lot paper trail that United States importers can hand straight to their customs broker.
Filed by Pan Ze, AndroidSBC field reporter, Wanlin Manufacturing Group export base.
WF-C3588-N6 Application Scenarios
The WF-C3588 line fits nine custom motherboard lanes, with the WF-C3588-N6 (Custom NVR and Security Surveillance Board) as the lead SKU for New York and United States programmes:
- City surveillance NVR: a municipal programme records and analyses sixteen channels per node on a fanless board.
- Face recognition terminal: a corporate lobby runs face-based entry with the camera and the reader bank on one multi-serial profile.
- License plate recognition gate: a parking operator pairs LPR on the NPU with relay control for the barrier.
- Perimeter detection site: a critical facility runs behaviour analytics at the fence line with local alarm relay.
- Building intercom station: a property network runs door stations on the wide-temperature variant outside the lobby.
- Retail loss prevention: a chain correlates POS events with camera analytics on the same recorder board.
- Turnstile controller: a stadium estate drives turnstiles and readers from the same board family as its recorders.
- Construction site security: a contractor deploys sealed NVRs with 4G failover where no cabling exists.
Partnership Models for New York Buyers
Three commercial structures are open to New York buyers on the WF-C3588-N6 and the rest of the WF-C3588 custom variants:
- OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
- ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
- Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.
The three tiers share one factory, one test flow and one certification file. For New York buyers the standard entry point on the WF-C3588-N6 is the 16GB + 128GB (WF-C3588-N6-C) configuration at MOQ 5,000 units per shipment, 1-3 days to sample on standard variants and 15-30 days to mass production.
Frequently Asked Questions
What exactly can be customised on an RK3588 motherboard from AndroidSBC?
Answer: Practically the layers that decide whether the board fits your product: the PCB layout and outline, the memory and storage fit (4GB to 32GB LPDDR4X/LPDDR5, eMMC to 128GB plus NVMe or SATA), the display interface mix (HDMI 2.1, DP 1.4, LVDS/eDP/MIPI), the I/O bank (CAN, RS232/RS485 multi-serial, relays, digital I/O), the wireless stack, and the enclosure or DIN-rail chassis. On top of that sit the firmware options: custom Android ROM with a locked launcher, custom Linux or Yocto image, pre-installed applications, custom boot animation and OTA updates. A United States buyer can start from a standard WF-C3588 variant and change one layer, or bring a full schematic and have the carrier designed from scratch.
Can AndroidSBC port a custom Android ROM or a custom Linux BSP to our carrier board?
Answer: Yes. Under NDA, AndroidSBC delivers custom Android ROM work with proprietary services and a locked launcher, custom Linux images on Ubuntu, Debian, Yocto or Buildroot, BSP ports for customer carriers, and driver development for project-specific I/O. Source access is released to the partner, and the port is performed at Longgang, which matters because a vendor BSP rarely matches a custom carrier revision on the first try.
Can the 6 TOPS NPU on a custom board run our own AI models?
Answer: The NPU is fully open on the custom line. Bring the model in PyTorch, ONNX, TensorFlow or Caffe and the Longgang desk handles the RKNN quantization, the runtime integration and the validation against your board's thermal and memory profile. Custom AI algorithm integration is a standard line item on the ODM scope, and the resulting model ships embedded in the firmware image burned per lot.
What are the MOQ and lead times for a custom RK3588 motherboard?
Answer: Standard-variant samples ship in 1-3 days from stock, so your engineering team can start integration while the custom scope is being quoted. A custom run follows a 15-30 day mass-production window after schematic and stack-up sign-off. MOQ is 5,000 units per shipment on standard variants; on custom configurations the MOQ is negotiable against volume commitments, and small batch orders are accepted for pilot phases. A twelve-month framework agreement with monthly lot releases brings the per-lot MOQ down further.
What certifications does a custom board need for United States, and who handles them?
Answer: AndroidSBC handles them at the factory. Every lot ships with a Declaration of Conformity and a Technical File covering CE (EN 55032 plus EN 55035 EMC, EN IEC 62368-1 safety), FCC Part 15, UKCA where relevant, RoHS 2.0 and the REACH declaration, all dated within the prior twelve months. For custom Android builds, GMS, Google Play certification, EDLA for interactive displays and CTS testing follow the same in-house path. Where a United States market needs an additional national mark, the export desk confirms coverage before the order is confirmed rather than after.
How long will AndroidSBC keep supplying a custom board?
Answer: Seven years minimum supply, patches maintained across the firmware lines, OTA for firmware and NPU model updates. For a United States programme running a custom board in the field, that commitment is written into the agreement at signature, which is what separates a source factory from a catalogue reseller.
Can AndroidSBC ship custom boards to Amazon FBA warehouses or 3PL consolidation points?
Answer: Yes, including DDP into Amazon FBA in the US, EU and Japan, plus 3PL consolidation points in Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Cartons are labelled to FBA inbound spec and the declaration names Longgang as the origin. Partners who consolidate in Hong Kong usually take FOB Yantian and handle the last leg themselves.
How does AndroidSBC handle RMA or DOA replacements on custom boards?
Answer: AndroidSBC targets a 0.3 percent DOA rate across the WF-C3588 line, measured over the prior twelve months. On RMA, the partner returns the faulty WF-C3588-N6 unit to Longgang with its burn-in barcode, and a replacement ships within ten business days. Because the burn-in record and the configuration file are attached per unit, the failure analysis normally comes back with a root cause rather than a credit note, which matters when a custom configuration is holding up a production line.
Contact AndroidSBC: Start Your WF-C3588-N6 Sourcing Conversation
The AndroidSBC export desk handles all WF-C3588 enquiries from New York and United States. Direct factory contact on the WF-C3588-N6 and the rest of the custom nvr and security surveillance board line is available through:
- Email: Androidsbc@163.com
- Export service hotline: +8613261677119
- Website: https://www.androidsbc.com
- Destination market file: FCC Part 15 authorisation with an FCC ID for radio modules and a UL or ETL listing for United States, administered by FCC / UL, entering at Port of Los Angeles on the Los Angeles to Yantian lane
- Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
OEM and ODM enquiries move fastest when the first message carries the annual volume, the customization scope and the Incoterm. Send those three and the export desk replies with a per-lot quote and the full WF-C3588 MOQ matrix inside two business days.
